6.9 Instructions for Use of Shift Lever
The shift lever shall be used during riding. When the bike is stationary, do not turn
the shift lever to avoid damaging your bike.
6.9.1 Use of Right Shift Lever
Applicable to models MT20 / MT20-P / FM201 / FM201-P / C26 / MT26G
When the right shift lever is shifted forward (the tap position is changed from
position 7 to position 1), the rear shift lever will move inwards, and the shifting
chain will move from the small piece of the rear Cassette to the large piece at the
same time, which will reduce the riding speed while reducing the pedaling strength
of riding;
When the lever is at the maximum position (Gear 1), press the acceleration button
on the right shift lever. The rear shift lever will move from the inside to the outside,
and the shift chain will move from the large piece of the Cassette to the small piece
position, which will increase the speed of riding and will also increase the pedaling
strength of the riding, so as to realize the shifting process of the rear shift lever.
To Next Page
Loading...
