8.1 Periodic maintenance and self-inspection
8.2 Instructions for maintenance and cleaning
8. Maintenance instructions
The electric bike needs to be maintained periodically. Adjust your electric bike at a local
bike shop twice a year. Critical components shall be inspected, repaired and adjusted
frequently by an experienced mechanic.
Check whether the front and rear wheel screws are tightened.
Check whether the tread of cover tire is worn or cracked. Whether the front
and rear tire pressure is suitable. Whether the driving system is unblocked.
Whether the joints are normal: Whether the braking wire fastener can be used
in lubricating state.
Regularly check whether the brake functions well, and increase the braking
distance on rainy/snowy days or during downhill riding.
Lubrication is an important part for maintaining an electric bike. The front
axle, center axle, Cassette and pivot point of the front fork suspension shall be
scrubbed every six months, and butter or oil should be added as needed.
Adjustment of the brake system: Loosen the screws on the brake wire fixed
seat, then tighten or loosen the brake wire, so that the average distance
between the two sides of the pads and the disc is 0.3mm-0.5mm, and finally
tighten the screws.
To avoid accident due to wetting of internal electronic parts and wires, do not
wash the bike with water.
Do not fill oil into front/rear brake, rim or tires.
8.1.1
8.2.1
8.2.2
8.1.2
8.1.3
8.1.4
8.1.5
8.1.6
To Next Page
Loading...
