Vivid V4 - Vivid EV Operational Process; Starting and Stopping the Vehicle

To Next Page

To Previous Page

WARNING

Operational

Process

5.1 Start the vehicle

1. Make sure the car is in Neutral and Switch on the Power

Key.

2. Select F for Forward or Reverse from F&R Switch.

3. Step down the Acceleration Pedal smoothly and the

vehicle will start running.

1. If you switch on Power Key rst before selecting Forward

or Reverse on F&R Button, the vehicle will not run, in this

case, please switch o Power Key, then select Forward or

Reverse from F&R Button, then step down Acceleration

Pedal to start the vehicle.

2. Depressing the accelerator pedal before switching on the

power key, the vehicle will not run. In this case, you should

release the accelerator pedal rst, and step it again, thus

the vehicle will start running.

5.2 Stop the Vehicle

1. Step on Brake Pedal to decelerate the vehicle until it

stops completely. Then lock the brake and shift F&R

button to Neutral position;

2. Switch o all lights;

3. Switch o the power key and take out the key