7.6 Lubrication of the Whole Vehicle
1. Use 901 vehicle brake oil DOT3 as brake oil;
2. Use 1L of 85W/90GL lubrication oil for gear box;
3. Use 1L of 90GL hypoid gear oil for the rear axle;
4. Lubrication points: a. steering gears; b. horizontal bars; c.
steering ball joints; d. bearings;
7.7 Running-in of New Vehicle
In order to guarantee the performance of the vehicle and
enhance its reliability and working lift, all parts in motor should
experience a certain period of running-in before the motor
works with its maximum capacity, thus, each new vehicle is
required to give one month of running-in time, detail proce-
dure as per the following:
1. Check the levels of battery carefully before running-in.
2. During running-in time, the speed should be limited as
follows:
3. If possible, try your best to avoid driving on poor condi-
tions roads.
4. Check and tighten regularly the xing parts of each
connecting points.
Notes
1. To avoid any damage on the brake shoe, park brake
should be released to its bottom before staring the vehicle.
2. The lubricant for rear power assembly must be applied
and changed as per user’s manual.
3. The brake system must be adjusted once every 3 months.
4. The electricity system must be checked once every 3
23
To Next Page
Loading...