2) Functions of Operating System
Power key
1. The power key is used to switch on the electrical system of
the vehicle.
2. To engage the motor and drive the vehicle, make sure the
Forward/Reverse switch is in Neutral and then Insert the key
and turn it clockwise to the ON position.
3. This will engage the 12V accessory system (including the
headlight, turn signal, taillight, brake light and horns) at the
same time allow driving of the vehicle. Choose Forward or
Reverse to move the vehicle.
4. To switch the power o, make sure the brake is engaged.
Turn the Forward/Reverse switch to Neutral, turn the key
counterclockwise to OFF position.
Forward/reverse switch
1. This switch is a three-position switch, depressing the upper
part gets the golf car move forwards while depressing the
lower part gets the golf car move backwards, and the
middle is neutral.
This switch must be fully depressed into the proper position, or
the electric system and motor will be damaged.
NOTE: the buzzer will beep when in the “reverse” position to give
warning to the people around your golf car.
!
WARNING
09
To Next Page
Loading...