Need help?Do you have a question about the Vivitar 2800 and is the answer not in the manual?
General| Power Source | 4 x AA batteries |
|---|---|
| Swivel Head | No |
| PC Sync Terminal | Yes |
| Hot Shoe | Yes |
| Guide Number | 28 (ISO 100, m) |
| Recycling Time | 6-8 seconds |
| Flash Duration | 1/1000 sec |
| Flash Modes | Auto, Manual |
| Tilt Head | Yes |
| Features | Ready light, test button |
| Type | Hot Shoe Mount Flash |
| Weight | 280 g (without batteries) |
Details of the flash panel, mode settings, light sensor, and adjustable bounce head.
Information on battery compartment, PC socket, mounting foot, and indicators.
Explanation of film speed scales, index lines, and auto range indicator lines.
Covers the open flash button and included wide angle/color panels.
Instructions for inserting and securing four AA alkaline batteries.
Guidance on mounting the flash and setting the camera's shutter speed.
Details on Blue and Red auto ranges, aperture settings, and distance capabilities.
How to adjust the film speed selector for accurate auto range settings.
Steps for focusing, selecting ranges, checking readiness, and shooting.
Procedure to verify subject distance within the selected auto range.
Using the adjustable head for bounced lighting effects and distance calculation.
Instructions for setting film speed and switching to manual mode.
Steps for focusing, matching distance to aperture, and calculating exposure.
Procedure for powering on, waiting for ready light, and taking the shot.
Guidance on calculating distances for bounce flash in manual operation.
Guide to red, blue, and yellow filters for creative effects and exposure adjustments.
Information on using the 85-B filter for tungsten film types.
Key specifications including guide number, flash duration, and auto range details.
Details on sensor angle, recycle time, number of flashes, and coverage.
Information on bounce angles, color temperature, and circuit functions.
To Next Page
