Vivitar ACTIVE LIFE - Earphone Power Management

18.
If the Charging Case is Plugged In
When you remove your earphones for the first time, and they will
power on and go into Bluetooth Pairing mode.
To power o your earphones, press and hold the button on either
earphone for approximately 3-4 seconds.
If the Charging Case is NOT Plugged In
When you remove your earphones for the first time, you will need
to power them on.
Press the power button on EACH earphone for 3-4 seconds to
power each on.
To power o your earphones, press and hold the button on either
earphone for approximately 3-4 seconds.
POWERING ON/OFF