Navigating the Menus
Each camcorder mode has a set of menus specific to that mode.
1) Press the MENU button for 2 seconds to open the menus for the current mode.
2) Press the T/UP or W/DOWN button to scroll between the various menus for the current
mode.
3) Press the SHUTTER/OK button to highlight the desired menu selection.
4) Press the MENU button for 2 seconds to confirm and save the highlighted menu option.
5) If the selection can be remembered by the camcorder, a selection icon appears to the
right of the selected menu option. Changes made to these options remain until you decide to
change them again at a later time.
Some menu options are single-use functions that are not remembered by the camcorder
and do not display the selection icon.
6) At any time you can press the MODE button to exit the menus and return to the previous
screen.
Note:
For most menu settings, an icon reflecting your selection displays on the LCD screen.
The settings are saved by your digital camcorder until you manually change the setting or
restore the camcorder’s default factory settings.
To Next Page
Loading...
