You will be asked to reconfirm the resetting to the Factory Default Settings.
• NO (CANCEL) - Select ‘No’ to exit the menu and return to the previous mode without
resetting to the default settings.
• YES (RESET) - Select ‘Yes’ and press the SHUTTER/OK button to proceed with the
reset.
You will then automatically exit the menu and return to the previous mode with the digital
camcorder settings set to the Factory Default Settings.
Note: After RESETTING to the default settings, it is recommended to select your system
Language. If you do not, the next time your camcorder is powered on, you will be prompted to
define this setting.
To Next Page
Loading...
