4. Press the OK button to confirm, save your choice and exit to the Setting menu.
5. Press the MENU button to revert back to the Camera capture mode to start taking photos with
the metering selected.
White Balance
This setting is used to adjust the color of your photos as per your light source.
1. Press the Up/Down button to select the White Balance menu.
2. Press the OK button to open the White Balance submenu.
3. Press the Up/Down button to highlight and select the White Balance option:
Auto, Daylight, Cloudy, Fluorescent, Bulb
4. The LCD screen automatically changes according to the White Balance selected.
5. Press the OK button to confirm, save your choice and exit to the Setting menu.
6. Press the MENU button to revert back to the Camera capture mode to start taking photos with
the new white balance selected.
To Next Page
Loading...
