Transfer media from my camcorder to my computer manually
(Using Macintosh)
1. Use the USB cable that came with your camcorder to connect your camcorder to your computer.
2. “MSDC” will appear on the LCD, indicating that your camcorder is in Mass Storage Mode.
3. The camcorder‟s device icon appears on the desktop.
4. Click on the device icon and open the DCIM folder and the folder inside to view the media files.
5. Select the files and drag them into your computer. Optionally, select the files and choose Copy
from the Finder‟s Edit menu. Then select a folder and choose Paste from the Edit menu.
6. We recommend that you copy the photo imags into the Pictures folder and the videos into the
Movies folder.
7. Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their
way to your computer.
Note: After you connect your camcorder to your PC, the camcorder will remain on all the while it is
plugged into the USB and it won‟t be switched off even though the screen appears to be blank. The
red LED on the front of the camcorder indicates that it is still on. On disconnecting the USB cable
the camcorder will automatically switch off.
To Next Page
Loading...
