3min The camcorder powers off after 3 minutes of sitting idle.
5min The camcorder powers off after 5 minutes of sitting idle.
DATE & TIME
The ‘Date & Time’ menu allows you to set your camcorder’s date and time. This date and time will
appear on the captured images when the Date Stamp is set to be active.
To set the MM/DD/YY and Hour: Minutes:
- Press the Up or Down button to change each setting and specify the date and time.
- Short press the POWER button to toggle and move between the time and date settings.
- Press OK to save and confirm the date and time setting.
LANGUAGE
You can select your camcorder’s language setting by selecting the desired language from the
‘Language’ menu.
The ‘Language’ menu options include:
English
French
Spanish
FORMAT…
You can use the ‘Format’ menu to delete all of the content that is currently on your camcorder’s
memory card.
Keep in mind that formatting the memory card will permanently delete all of the content on
your camcorder’s memory card.
This option will delete all of the content at one time. If you would like to delete individual images,
use the ‘Delete’ menu in the camcorder’s Playback Mode.
NOTE: Restoring factory defaults or formatting the camera may result in the loss of data.
Please ensure you have backed up your images before you attempt this.
To Next Page
Loading...
