Powering Your Digital Camcorder ON/OFF
Make sure the batteries have been inserted properly into your digital camcorder. Batteries
not included.
Make sure a Class 4 SDHC or higher SD Memory Card (up to 32GB) has been inserted
into your digital camcorder. SD Memory Card not included.
Please see Initial Setup for more information.
POWERING THE DIGITAL CAMCORDER ON
Flip open the LCD screen and press the Power button to turn your digital camcorder ON.
The camcorder will be in Video Capture mode to start.
POWERING THE DIGITAL CAMCORDER OFF
While the camcorder is on, you can press the Power button again at any point to turn your
camcorder OFF. You will see a “Goodbye” splash screen and then the camcorder will power off
completely.
AUTO POWER OFF – POWER SAVING
Your digital camcorder includes an Auto Power Off feature that automatically turns off your
camcorder after a specific period of time that your camcorder is left idle. The Auto Power Off
can be set from the ‘Auto Power Off’ Photo Capture Mode or Video Capture Mode settings
menu.
To Next Page
Loading...
