Navigating the Menus
Each camcorder mode has a set of menus specific to that mode.
Each camera mode has a set of menus specific to that mode.
1) Press the OK/SET button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to scroll between the various menus for the current
mode.
3) Press the UP or DOWN button to highlight the desired menu selection.
4) Press the OK/SET button to confirm and save the highlighted menu option.
5) If the selection can be remembered by the camera, a selection icon appears to the right
of the selected menu option. Changes made to these options remain until you decide to
change them again at a later time.
Some menu options are single-use functions that are not remembered by the camera and
do not display the selection icon.
6) At any time you can press the MODE button to exit the menus and return to the previous
screen.
Note:
For most menu settings, an icon reflecting your selection displays on the LCD screen.
The settings are saved by your digital camera until you manually change the setting or
restore the camcorder’s default factory settings.
To Next Page
Loading...
