SHARPNESS MENU
You can set the level of sharpness in the images taken with your camcorder. The sharpness
level dictates if the edges of objects in the image are more or less distinct.
1) Press the OK/SET button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to scroll and select the ‘Sharpness’ menu.
3) Press the UP or DOWN button to highlight the desired menu option.
4) Press the OK/SET button to select and confirm the highlighted menu option.
A selected option icon will appear on the selected item.
5) To continue within the menus and select a different menu option:
Press the LEFT or RIGHT button to select the next menu item.
6) To exit the menu view:
Press the MODE button to exit the menu and return to your previous mode.
An icon reflecting your selection will display on the LCD screen.
EXPOSURE MENU
The ‘Exposure’ setting helps you control the amount of light that enters your camcorder’s lens.
This setting should be adjusted when the environment is lighter or darker than normal.
When the environment has more light than is needed, reduce the exposure setting (by using the
negative - count) to reduce the amount of light allowed into the lens by your camcorder.
If the environment has less light (darker) than is needed, increase the exposure setting (by
using the positive + count) to increase the amount of light allowed into the lens by your
camcorder.
1) Press the OK/SET button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to scroll and select the ‘Exposure’ menu.
3) Press the UP or DOWN button to highlight the desired menu option.
4) Press the OK/SET button to select and confirm the highlighted menu option.
A selected option icon will appear on the selected item.
5) To continue within the menus and select a different menu option:
Press the LEFT or RIGHT button to select the next menu item.
To Next Page
Loading...
