Macro Switch /
MACRO ON:
Your camera contains a Macro Switch that allows you to manually enable or disable the Macro mode
on your camera. While using the Macro mode, you can capture images at close range (15 ~ 30 cm).
To turn the Macro mode ON, slide the Macro Switch on the side of your camera UP to the flower
icon .
When enabled, the Macro mode will allow your camera to focus on an object that is close to the
camera.
The flower icon will appear on the LCD and indicates that the Macro mode is ON.
MACRO OFF:
To turn the Macro mode OFF-
Slide the Macro Switch on the side of the camera DOWN to the mountain icon.
The mountain icon will appear on the LCD display.
When Macro mode is off, images can be captured from 1.5m - ∞ (infinity).
Note:
The Macro mode must be turned OFF when you want to use the following photo features of
your camera: Face Detect.
To Turn the Macro mode OFF: Slide the Macro Switch down to the mountain icon to turn
Macro mode OFF.
The mountain icon will appear on the LCD display.
LED Flash Option
To increase the lighting in dark situations, press the SET button to activate the 2 LED Flash Lights
on the front of the camera below the lens.
Press the SET button again to turn the LED Lights off.
Hide/Show the LCD Icons
The display of the icons on the LCD screen can be hidden or visible as desired.
Hold the MODE button for 2 seconds to hide the display of the icons on the screen.
Press the MODE button again to redisplay the icons on the screen
To Next Page
Loading...
