Vivitar DVR 947HD - Video Playback Mode

25
Video Playback Mode
The Playback Mode allows you to review and edit photos and videos that you‟ve already taken with
you camera.
 When you first turn on the camera, the camera will be in Video Capture mode by default.
 Press the MODE button twice to open the Playback Mode.
 The latest captured image appears on the LCD screen.
If there are no images stored, a message (No File) appears.
Playing Videos on Your Camera
1) Select your Video:
 Once in Playback mode, press the direction button LEFT or RIGHT to scroll through the
images on your camera‟s memory card until you find the video you would like to view.
 Each captured image (video and photo) is displayed on the LCD screen.
 Videos appear with an „AVI‟ icon on the top left of the LCD screen.
2) Play your selected video:
 Press the Shutter button to START playing the video.
 Press the Shutter button again to PAUSE the video and to continue playing and pausing as
needed.
 To fully STOP the video and restore the icons to the LCD, press the SET button.
 While the Video is playing all the icons on the top section of the LCD disappear.
Thumbnail View
Easily navigate and select the image you wish to view by using the Thumbnail View.
The images on your camera will be displayed in a 3 X 3 matrix where you can use the direction buttons
to scroll and select images from the thumbnails.
1) Push the W/Zoom Out button.
2) All the images on your camera will appear in the Thumbnail View.
Videos appear with a „Video‟ filmstrip icon and Photos appear with an „Image‟ icon.
3) Press the direction button UP / DOWN / LEFT / RIGHT to scroll and select the image you wish to
view.
4) Press the SET button to enlarge the image full size.
5) Once the selected video is full size you can play and view the video.