Date/Time Menu
When you capture an image with your camera, the image will include a time stamp with the date and
time that the image was taken.
The Date/Time menu allows you to set your camera‟s date and time as desired. You can also disable
the timestamp for future images that will be taken with your camera.
On – The timestamp will appear on photos taken
Off – The date stamp will not appear on photos taken
To Enable/Disable the Timestamp:
1) Press the MENU button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to scroll and select the Date/Time menu.
3) Press the UP or DOWN button to highlight the desired menu selection.
4) Press the SET button to confirm and select the highlighted menu option.
5) A selected option icon will appear on the selected item.
6) Press the LEFT or RIGHT button to select the next menu item.
7) Press the MODE button to exit the menu and return to your previous mode.
8) Remember that this setting will be remembered by your camera until you manually change the
setting or restore the camera‟s default factory settings.
To Set the Date and Time:
1) Press the MENU button to open the menus for the current mode.
2) Press the LEFT or RIGHT button to scroll and select the Date/Time menu.
3) Press the UP or DOWN button to highlight the “Date Setup” menu option, and then press the SET
button to open the menu.
4) Scroll through the date and time menus with the RIGHT and LEFT buttons.
5) For each field in the menu, use the UP and DOWN buttons to set the specific date and time.
6) When you have finished setting the date and time, press the SET button to save your settings and
return to the previous mode.
7) Press the MODE button to exit the menu without saving your settings and return to your previous
screen.
To Next Page
Loading...
