Vivitar DVR 960HD - Initial Camera Setup

5
Initial Camera Setup
Installing the Batteries
Installing the Memory Card
 Charge before using your camera for the
first time.
To Charge the Lithium Battery:
- Insert the battery into the Dock Charger
- Connect the USB cable to the Dock
Charger and the other end of the cable
either to your computer USB slot or to the
supplied AC Adapter (which you then plug
into an electrical outlet).
- Charge light will turn off when the battery is
fully charged.
 Insert Lithium battery (as shown above).
Turning On the Camera
Using the Camera
 Important: You must
use a Class 4 SD card
or higher SD card
only.
 Insert SD Memory
card (up to 32GB)
before use.