28
Date/Time Menu
When you capture an image with your camcorder, the image will include a time stamp with the
date and time that the image was taken.
The ‘Date/Time’ menu allows you to set your camcorder’s date and time as desired. You can
also disable the timestamp for future images that will be taken with your camcorder.
On – The timestamp will appear on photos taken.
Off – The date stamp will not appear on photos taken.
To Enable/Disable the Timestamp:
1. Press the MENU button to open the menus for the current mode.
2. Press the LEFT or RIGHT button to scroll and select the ‘Date/Time’ menu.
3. Press the UP or DOWN button to highlight a specific option.
4. Press the SET button to confirm and select the highlighted menu option.
A selected option icon appears on the selected item.
5. To continue within the menus and select a different menu option:
Press the LEFT or RIGHT button to select the next menu item.
6. To exit the menu view:
Press the MODE button to exit the menu and return to your previous mode.
An icon reflecting your selection is displayed on the LCD screen.
To Set the Date and Time:
1. Highlight the ‘Date Setup’ menu option.
1. Press the SET button to select and confirm and enter the ‘Date Setup’ option.
2. The ‘Date Setup’ submenu is displayed on the LCD screen.
3. Scroll through the window using the RIGHT and LEFT buttons. For each field in the menu,
use the UP and DOWN buttons to set the specific time and date.
4. Once you have completed setting the time and date, press the SET button to save your
settings and return to the current mode.
To Next Page
Loading...
