VIVOHOME VB130 - Leak-Detect

SECTION F
Leak-detect
General Information
Features
Incorporated with advanced leak detection technology, this is our new
product with the functions of easy operation, stable function, and small
appearance, it's an ideal and economic halogen leak detector.
Detect all kinds of halogen refrigerants.
Sensitivity can be adjusted at any time, and it can be adjusted auto-
matically to the best state of detection.
Inner precise IC with ultra-low-consumption circuit design, more
stability, longer battery life.
Tricolor visual dispay of battery voltage.
Excellent sensor, high sensivity, longer use time.
11
Reset Feature/Automatic Circuit
Battery Voltage Indication
Green: The battery voltage is normal and sufficient for proper
operation.
Orange: Battery voltage is approaching the lower threshold
foroperation, repace it as soon as possible.
Red: The battery voltage is below an acceptable operating level.
The front light of the panel indicates the leak and the battery voltage.
Reset: Upon initial power on, the unit automatically sets itself to
ignore the level of refrigerant present at the tip in 6's and enter into
the best state of detection. If you pace the sensing tip near a known
leak and switch the unit on, it's convinent to find a higher concentra-
tion leak. Or move to fresh air and switch on, adjust ot maximum
sensitivity, and any concentration above zero will be detected.
Automatic-circuit: When in the measuring state, the automatic circuit
will follow the changing concentration of halogen gas in the environ-
ment to avoid a false aarm.
WJL-6000 features on automatic circuit and a reset function that set
the unit to ignore ambient concentrations of Halogen.
Adjustment of Sensitivity
The unit features variable-speed sensivity adjustment and can be
adjusted during the course of detection. Clockwise adjusting means
high sensivity, and vice versa. It does not mean that, when selecting, the
higher the sensitivity is adjusted,the better the unit will work,because if
the air is not fresh, selecting a higher sensitivity will cause an improper
aarm.
Leak Aarm
When the leaked gas is detected, the audible tone will change to a
"siren"-type sound. More refrigerant, more sirens. At the same time, the
indicator light is fashing quickly.
●
●
12
●
●
●
●
●
Structure
Flexible Probe
Indicator Light
Battery Storehouse
Buzzer
Power ON/OFF
and Sensitivity
Adjusting Faucet
Sensing Tip