Mini Digital Amplifier
1 x User Manual
Notes：
The IR remote and its battery are offered for charge separately.
The IR receiver is also offered for charge.
Please confirm if the product and the accessories are all included, if not, please
contact with the dealers.
2. System Connection Introduction
2.1. Audio Output
2.1.1. Default output: 2x20Watt@4Ohm
The default output of amplifier is 2x20Watt@4Ohm, so user can connect the amplifier
output in the regular way. As the picture below:
2.1.2. Bridge connection: 1x40Watt@8Ohm
The VL120004has the bridge connection, to double the output power at
1x40Watt@8Ohm. It will sum up the input left channel and input right channel to be
mono output, and the power is up to 40Watt.
The bridge connection is:
2.1.3. Dual-mono Output
The VL120004 also has the function of double-mono output. It can sum up the left and
right channel, to be the mono audio output. In this way, the both of the outputs are
Connecting the two pins, like this
Connecting the four pins, like this
To Next Page
Loading...