Vivotek CC8370-HV - Page 206

VIVOTEK
206 - User's Manual
use this since [httpversion] > 0301a
image_focusassist
<Not recommended to use
this>
<boolean> 0/7 Indicate whether to support focus assist.
* We replace "capability_image_ focusassist "
with " capability_image_c0_ focusassist ".
* Reserved for compatibility, and suggest don't
use this since [httpversion] > 0301a
localstorage_manageable <boolean> 0/7 Indicate whether manageable local storage is
supported.
localstorage_seamless <boolean> 0/7 Indicate whether seamless recording is
supported.
localstorage_modnum 0,
<positive integer>
0/7 The maximum MOD connection numbers.
localstorage_modversion <string> 0/7 Indicate MOD daemon version
localstorage_stormgrversi
on
<string> 0/7 Indicate storage manager daemon version
localstorage_supportedge 0,
<positive integer>
0/7 An 32-bit integer, which indicates the
supportive application of edge storage.
If the value of this parameter is larger than 0,
it means that the camera supports edge
recording function.
bit 0 : It supports to record directly to an
on-board SD-Card.
bit 1~: Currently, they are reserved bit, and
the default value is 0.
localstorage_slconnum 0,<positive integer> 0/7 The maximum seamless connection number.
remotecamctrl_master 0, <positive
integer>
0/7 Indicate whether to support remote auxiliary
camera (master side), this value means
supporting max number of auxiliary camera.
remotecamctrl_slave <boolean> 0/7 Indicate whether to support remote camera
control (slave side).
fisheyelocaldewarp_c<0~
(capability_nvideoin)-1>
<product dependent>
0, <positive
integer>
0/7 Indicate the supported streams of local
dewarp. One bit represents one supported
stream. The LSB indicates stream 0.
Ex: “3” means stream 0 and stream 1 support
local dewarp.
* Only available when "capability_fisheye" > 0