Need help?Do you have a question about the Vivotek IP816A-HP and is the answer not in the manual?
Instructions for connecting the camera to a network using Power over Ethernet.
Steps to access the camera's interface using a web browser.
Selecting the network connection type (LAN, PPPoE).
General| Maximum Resolution | 1920x1080 |
|---|---|
| Video Compression | H.264, MJPEG |
| Audio Capability | Two-way audio |
| Audio Compression | G.711, G.726 |
| Lens Type | Fixed |
| Day/Night | Yes |
| IR Illuminators | Built-in IR illuminators |
| Maximum Frame Rate | 30 fps |
| Multiple Streams | Yes |
| Network Protocols | IPv4, IPv6, TCP/IP, HTTP, HTTPS, FTP, SMTP, UPnP, SNMP, RTSP, RTP, UDP, IGMP, ICMP, DHCP, NTP, DNS, DDNS, PPPoE, CoS, QoS, 802.1X |
| Interface | 10/100Base-TX Ethernet (RJ-45) |
| DI/DO | 1 x Digital Input, 1 x Digital Output |
| Local Storage | MicroSD/SDHC/SDXC card slot |
| Operating Temperature | -10°C to 50°C |
| Power Supply | 12V DC |
To Next Page
