VIVOTEK
50 - User's Manual
System > General settings
This section explains how to congure the basic settings for the Network Camera, such as the
host name and system time. It is composed of the following two columns: System, and System
Time. When finished with the settings on this page, click Save at the bottom of the page to
enable the settings.
System
Host name: Enter a desired name for the Network Camera. The text will be displayed at the top of the
main page, and also on the view cells of the ST7501 and VAST management software.
Turn o the LED indicators: If you do not want others to notice the network camera is in operation, you
can select this option to turn o the LED indicators.
To Next Page
Loading...
Need help?
General
