Vivotek IB9365-EHT - Page 219

VIVOTEK
User's Manual - 219
<product
dependent>
restoreatwb <positive
integer>
4/4 Restore of adjusting white balance of image
according to mode settings
freeze
<product dependent>
<boolean> 4/4 Enable/disable Image freeze while patrolling.
0: disable
1: enable
* Only available when
"capability_image_c<0~(n-1)>_freeze" is 1
deinterlace_enable <boolean> 4/4 Enable/disable deinterlace function.
0: disable
1: enable
* Only available when
"capability_image_c<0~(n-1)>_deinterlace_
support" is 1.
deinterlace_mode spatial,blend 4/4 Users can choose between two different
deinterlacing techniques:
Spatical mode provides the best image quality,
while Blend mode provides better image
quality (than not using the deinterlace
function at all).
* Only available when
"capability_image_c<0~(n-1)>_deinterlace_
support" is 1.
xoffset 0~100 4/4 Adjusting the image to proper position
horizontally.
* Only available when the bit 4 of
capability_image_c<0~(n-1)>_basicsetting is
1.
yoffset 0~100 4/4 Adjusting the image to proper position
vertically.
* Only available when the bit 5 of
capability_image_c<0~(n-1)>_basicsetting is
1.
lens_alignment 0~100 4/4 Stitch the sensors together into focused
position.
* Only available when
"capability_image_c<0~(n-1)>_lens_alignm
ent" is 1.