Vivotek IB9365-EHT - Page 220

VIVOTEK
220 - User's Manual
lens_ldc_mode <boolean> 4/4 Enable/disable lens distortion correction.
* Only available when
"capability_image_c<0~(n-1)>_lens_ldc_sup
port" is 1.
palette_mode Available value
is listed in
"capability_im
age_c<0~(n-1
)>_palette_m
ode"
4/4 Set color palette option.
* Only available when
"capability_image_c<0~(n-1)>_palette_supp
ort" is 1.
* Not support "policy=day" anymore when the
version number (httpversion) is equal or
greater than 0310a.
profile_i<0~(m-1)>_enable <boolean> 4/4 Enable/disable this profile setting
profile_i<0~(m-1)>_policy night,
schedule
4/4 The mode which the profile is applied to.
* Not support "policy=day" anymore when the
version number (httpversion) is equal or
greater than 0301a.
profile_i<0~(m-1)>_begintime hh:mm 4/4 Begin time of schedule mode.
profile_i<0~(m-1)>_endtime hh:mm 4/4 End time of schedule mode.
profile_i<0~(m-1)>_brightness
<Not recommended to use this>
-5~5,100 4/4 -5: Darker <-> 5: Bright
100: Use "
image_c<0~(n-1)>_brightnesspercent"
* Only available when bit 0 of
"capability_image_c<0~(n-1)>_basicsetting"
is 1
* We replace "profile_i0_brightness" with
"profile_i0_brightnesspercent".
* This parameter will not be used after the
version number (httpversion) is equal or
greater than 0400a.
profile_i<0~(m-1)>_contrast
<Not recommended to use this>
-5~5,100 4/4 -5: Less contrast <-> 5: More contrast
100: Use "
image_c<0~(n-1)>_contrastpercent"
* Only available when bit 1 of
"capability_image_c<0~(n-1)>_basicsetting"
is 1.