Vivotek IB9365-EHT - Page 371

VIVOTEK
User's Manual - 371
http://myserver/cgi-bin/admin/peripheral.cgi?channel=0&operation=set&washer_mode=wiper&
washer_status=on
Response:
HTTP/1.0 200 OK\r\n
Cache-control: no-cache\r\n
Pragma: no-cache\r\n
\r\n
"washer_mode : OK\r\n"
"washer_status : FAIL\r\n"
PARAMETER VALUE DESCRIPTION
channel 0~"capability_nvideoin"-1 Channel of the video source.
washer_mode wiper Apply the wiper to the mode of washer control
system.
*Only available when
capability_peripheral_c<0~(n-1)>_washer_supp
ort=1
washer Apply the washer to the mode of washer control
system.
*Only available when
capability_peripheral_c<0~(n-1)>_washer_supp
ort=1
washer_status on Enable the functionality of washer control system.
*Only available when
capability_peripheral_c<0~(n-1)>_washer_supp
ort=1
off Disable the functionality of washer control system.
*Only available when
capability_peripheral_c<0~(n-1)>_washer_supp
ort=1
washer_dwelltime 15~999 Apply washer washer control system operation
time (including the time when spraying and wiper
actions take place).
*Only available when
capability_peripheral_c<0~(n-1)>_washer_supp
ort=1
heater_status auto automatic control the heater component to keep
the device in a workable environment.
*Only available when