Vivotek IB9367-EHT-v2 - Page 285

VIVOTEK
User's Manual - 285
© 2020 VIVOTEK INC. All Right Reserved
145
NAME VALUE SECURITY
(get/set)
DESCRIPTION
e_autotracking stream is supported.
* Only available when
"capability_smartstream_support" is 1
smartstream_mod
e_manual
<boolean> 0/7 Indicate whether manual smart
stream is supported.
* Only available when
"capability_smartstream_support" is 1
smartstream_mod
e_hybrid
<boolean> 0/7 Indicate whether hybrid(autotracking+
manual) smart stream is supported.
* Only available when
"capability_smartstream_support" is 1
smartstream_nwin
dow_autotracking
<positive integer> 0/7 Maximum number of tracking window
of autotracking.
* Only available when
"capability_smartstream_support" is 1
smartstream_nwin
dow_manual
<positive integer> 0/7 Maximum number of tracking window
of manual.
* Only available when
"capability_smartstream_support" is 1
smartstream_nwin
dow_hybrid_autotr
acking
<positive integer> 0/7 Maximum number of tracking window
of autotracking in hybrid mode.
* Only available when
"capability_smartstream_support" is 1
smartstream_nwin
dow_hybrid_manu
al
<positive integer> 0/7 Maximum number of tracking window
of manual in hybrid mode.
* Only available when
"capability_smartstream_support" is 1
vadp_supportfeatu
re
<positive integer> 0/7 An 32-bit integer, each bit can be set
separately as follows:
Bit 0 => VADP interface
Bit 1 => Capture video raw data
Bit 2 => Support encode jpeg
Bit 3 => Capture audio raw data
Bit 4 => Support event trigger
Bit 5 => Support license registration
Bit 6 => Support shared memory API
© 2020 VIVOTEK INC. All Right Reserved
146
NAME VALUE SECURITY
(get/set)
DESCRIPTION
Bit 7 => Support digital signature of
package
Bit 8 => Support snapshot
Bit 9 => Support upload encrypted
package
vadp_npackage <positive integer> 0/7 Indicate the maximum number of
VADP package that can be uploaded
to the device.
camctrl_httptunnel
<Not support
anymore>
<boolean> 0/7 Indicate whether to support
httptunnel.
* Not support this parameter
anymore when the version number
(httpversion) is equal or greater than
0301b.
* It will be replaced by
capability_camctrl_ptztunnel.
camctrl_ptztunnel <boolean> 0/7 Indicate whether to support
ptztunnel.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0301b.
This equals
"capability_camctrl_c0_ptztunnel".
* This is kept for compatibility.
camctrl_privilege <boolean> 0/7 Indicate whether to support “Manage
Privilege” of PTZ control in the
security page.
1: support both
/cgi-bin/camctrl/camctrl.cgi and
/cgi-bin/viewer/camctrl.cgi
0: support only
/cgi-bin/viewer/camctrl.cgi
This is equivalent
to"capability_camctrl_c0_privilege".
* This is kept for compatibility.
uart_httptunnel <boolean> 0/7 Indicate whether to support HTTP