EasyManuals Logo

Vivotek IB9368-HT User Manual

Vivotek IB9368-HT
400 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
VIVOTEK
76 - User's Manual
Bit rate control
Constrained bit rate:
A complex scene generally produces a larger le size, meaning that higher bandwidth
will be needed for data transmission. The bandwidth utilization is configurable to
match a selected level, resulting in mutable video quality performance. The bit rates
are selectable at the following rates: 20Kbps, 30Kbps, 40Kbps, 50Kbps, 64Kbps,
128Kbps, 256Kbps, 512Kbps, 768Kbps, 1Mbps, 2Mbps, 3Mbps, 4Mbps, 6Mbps,
8Mbps, 10Mbps, 12Mbps, 14Mbps, ~ to 80Mbps. You can also select Customize
and manually enter a value up to 40Mbps.
- Target quality: Select a desired quality ranging from Medium to Excellent.
- Maximum bit rate: select a bit rate from the pull-down menu. The bit rate ranges
from 20kbps to a maximum of 80Mbps. The bit rate then becomes the Average or
Upper bound bit rate number. The Network Camera will strive to deliver video streams
around or within the bit rate limitation you impose.
- Policy: If Frame Rate Priority is selected, the Network Camera will try to maintain
the frame rate per second performance, while the image quality will be compromised.
If Image quality priority is selected, the Network Camera may drop some video
frames in order to maintain image quality.
Smart Q: Select ON or OFF to enable or disable the feature. Smart Q is scene-aware.
The Smart Q reduces frame size and bit rate consumption through the following:
Dynamically adjusting the image quality for scenes in different luminosities in low
light frames. Less noises means less of the bandwidth consumed.
Endorsing different qualities for the I frames and P frames, and hence reduces
the frame size.
Dividing a single frame into different sections, and giving these sections different
qualities. For a highly complex area, such as an area with dense vegetation,
screen windows, or repeated patterns (complex textiles patterns like wall paper),
having a lower quality value actually poses little effects on human eyes.
Unnecessary quality is unrecognized by human eyes and wastes the bit rate.
The Smart Q streaming can save up to 50% to 80% of bandwidth in different
illumination conditions while keeping the same imaging quality. These numbers come
from the comparison between Smart Stream II and Smart Stream III streamings.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vivotek IB9368-HT and is the answer not in the manual?

Vivotek IB9368-HT Specifications

General IconGeneral
Built-in HDDNo
Flash memory128 MB
Internal memory256 MB
Card reader integratedYes
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
FocusMotorized
Digital zoom48 x
Number of lenses1
Focal length range2.8 - 12 mm
Maximum aperture number2.8
Minimum aperture number1.4
Sensor typeCMOS
Optical sensor size1/2.9 \
Total megapixels2 MP
Maximum resolution1920 x 1080 pixels
Supported video modes1080p
Image quality adjustmentBrightness, Contrast, Saturation, Sharpness
Video compression formatsH.264, H.265, M-JPEG
Noise reduction technology3D noise reduction
Supported graphics resolutions1920 x 1080 (HD 1080)
Tilt angle range0 - 90 °
Angle of rotation180 °
Camera shutter speed1/5 - 1/32000 s
Minimum illumination0.055 lx
TypeIP security camera
CertificationCE, FCC Class B, UL, LVD, VCCI, C-Tick
Placement supportedIndoor & outdoor
Connectivity technologyWired
LED typeIR
Night vision distance30 m
Number of illumination LEDs2
Signal-to-Noise Ratio (SNR)68 dB
Number of users10 user(s)
Networking standardsIEEE 802.1x, IEEE 802.3af
Ethernet interface typeFast Ethernet
Supported network protocols802.1X, ARP, CIFS/SMB, CoS, DDNS, DHCP, DNS, FTP, HTTP, HTTPS, ICMP, IGMP, IPv4, IPv6, NTP, PPPoE, QoS, RTSP/RTP/RTCP, SMTP, SNMP, SSL, TCP/IP, TLS, UDP, UPnP, ONVIF
IK codeIK10
Form factorBullet
Mounting typeWall
Product colorBlack, White
LED indicatorsPower, Status, System
International Protection (IP) codeIP66
Power source typePoE
Power consumption (max)12.95 W
Power consumption (typical)9 W
Operating temperature (T-T)-30 - 60 °C
Operating relative humidity (H-H)0 - 90 %
Mac operating systems supportedMac OS X 10.12 Sierra
Windows operating systems supportedWindows 7, Windows 8
Weight and Dimensions IconWeight and Dimensions
Depth85 mm
Width214.5 mm
Weight738 g

Related product manuals