Vivotek IP8166 - Page 170

VIVOTEK
170 - User's Manual
265_prioritypoli
cy * Only available when h265 is listed in
"capability_videoin_codec".
* Only valid when "ratecontrolmode"=
cbr
s<0~(m-1)>_h
265_maxframe
1~"capability_videoin_c<n>_h265_m
axframerate"
1/4 The maximum frame rates of a H265
stream at different
resolutions("capability_videoin_c0_re
solution ") are recorded in
"capability_videoin_c<n>_h265_maxf
ramerate"
* Only available when h265 is listed in
"capability_videoin_codec".
s<0~(m-1)>_h
265_profile
0~2 1/4 Indicate H265 profiles
0: baseline
1: main profile
2: high profile
* Only available when h265 is listed in
"capability_videoin_codec".
s<0~(m-1)>_m
jpeg_ratecontro
lmode
cbr, vbr 4/4 cbr: Constant bit rate mode.
vbr: Fixed quality mode, all frames are
encoded in the same quality.
s<0~(m-1)>_m
jpeg_quant
1~5,
99, 100
4/4 * Only valid when "ratecontrolmode"=
vbr.
Set the pre-defined quality level:
1: Medium
2: Standard
3: Good
4: Detailed
5: Excellent
100: Use the quality level in
"qpercent"
99: Use the quality level in "qvalue"
s<0~(m-1)>_m
jpeg_qvalue
10~200
(Only valid when
"capability_api_httpversion" format is
XXXXX_1,
4/4 Manual video quality level input. The Q
value which is used by encoded library
directly.