Need help?Do you have a question about the Vivotek IP8161 and is the answer not in the manual?
Important safety and legal considerations before installing and using the network camera.
Guide for configuring the camera for internet connectivity.
Steps to set up internet access for the camera through a router.
Connecting the camera to a PoE-enabled switch for power and data.
Connecting the camera to a non-PoE switch using a power injector.
How to access the camera's interface via a web browser.
Accessing advanced configuration options not available in basic mode.
Configuring basic settings like host name and system time.
Enabling password protection and managing the administrator account.
Selecting between LAN, static IP, or PPPoE for network connection.
Setting up the camera for local area network access with static IP.
Managing access permissions based on client IP addresses.
Configuring video title, color, power line frequency, iris mode, and caching.
Setting up motion detection windows, sensitivity, and percentage.
Selecting trigger sources like motion detection, digital input, or system boot.
Restoring camera settings to factory defaults, with options to retain certain settings.
General| Resolution | 1920x1080 |
|---|---|
| Sensor Type | CMOS |
| IR Cut Filter | Yes |
| WDR Technology | WDR Enhanced |
| Day/Night | Yes |
| Video Compression | H.264, MJPEG |
| Maximum Frame Rate | 30 fps @ 1920x1080 |
| Audio Compression | G.711, G.726 |
| Network Interface | RJ-45 |
| Power Consumption | Max. 7.5 W |
| Ingress Protection | IP66 |
| Sensor Size | 1/3" |
| Focal Length | 3 ~ 9 mm |
| Lens Type | Vari-focal |
| Aperture | F1.2 |
| Shutter Time | 1/5s~1/32, 000s |
| Audio Input | Microphone input |
| Audio Output | Audio output |
| Ethernet | 10/100 Base-T |
| Protocols | IPv4, HTTP, HTTPS, TCP, SMTP, FTP, DHCP, NTP, UPnP, RTSP, RTP, RTCP, IGMP |
| Local Storage | MicroSD/SDHC card slot |
| Operating Temperature | 50°C |
| Power Supply | 12V DC |
| Power over Ethernet | IEEE 802.3af |
To Next Page
