Vivotek IP8161 - ePTZ Recall via URL; ePTZ Preset Locations via URL

VIVOTEK
148 - User's Manual
ePTZ Recall
Note: This request requires camctrl privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/camctrl/eRecall.cgi?channel=<value>&stream=<value>&
recall=<value>[&return=<return page>]
PARAMETER VALUE DESCRIPTION
channel <0~(n-1)> Channel of the video source.
stream <0~(m-1)> Stream.
recall Text string less than 40 characters One of the present positions to recall.
return <return page> Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or
relative path according to the current path.
ePTZ Preset Locations
Note: This request requires Operator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/operator/ePreset.cgi?channel=<value>&stream=<value>
[&addpos=<value>][&delpos=<value>][&return=<return page>]
PARAMETER VALUE DESCRIPTION
channel <0~(n-1)> Channel of the video source.
stream <0~(m-1)> Stream.
addpos <Text string less than 40 characters> Add one preset location to the preset list.
delpos <Text string less than 40 characters> Delete preset location from the preset list.
return <return page> Redirect to the page <return page> after the
parameter is assigned. The <return page> can be
a full URL path or relative path according to the
current path.