Vivotek IP8166 - Page 174

VIVOTEK
174 - User's Manual
mounttype
<product
dependent>
ceiling, wall, floor 1/6 wall mount: 180° panoramic view
ceiling mount: 360° surround view
without blind spots
floor mount: 360° surround view
without blind spots
* Only available when
"capability_fisheye" > 0
enablewatermar
k
<product
dependent>
0, 1 1/6 0: Not to add watermarks on images
1: Add watermarks on images
* Only available when
"capability_fisheye" > 0
s<0~(m-2)>_fi
sheyedewarpmo
de
<product
dependent>
‘1O, 1P, 2P, 1R, 4R’ for ceiling/floor
mount
‘1O, 1P, 1R, 4R’ for wall mount
<product dependent>
1/4 Local dewarp mode.
“1O” is original mode (disable).
Supported dewarp mode is different by
mount type.
(videoin_c<n>_mounttype)
Supported mode list could be
extracted from
(capability_videoin_c<n>_localdewar
p_typeceilingmount) and
(capability_videoin_c<n>_localdewar
p_typewallmount)
* Only available when
"capability_fisheyelocaldewarp_c<0~(
capability_nvideoin)-1>" > 0
Group: videoin_c<0~(n-1)>_s<0~(m-1)>_h264_smartstream2 (capability_smartstream_support=1 and
capability_smartstream_version=2.0)
Group: videoin_c<0~(n-1)>_s<0~(m-1)>_h265_smartstream2 (capability_smartstream_support=1,
capability_smartstream_version=2.0 and h265 is listed in "capability_videoin_codec")
n denotes the value of "capability_nvideoin",m denotes the value of " capability_nmediastream"
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 4/4 Enable or Disable smart codec
function
mode autotracking,manual,hybrid 4/4 Set Smart stream mode
qualitypriority -5,-4,-3,-2,-1,1,2,3,4,5 4/4 The differential value of Q between