Vivotek IP8330 - Page 122

VIVOTEK
122 - User's Manual
night,
schedule
profile_i<0~(m-1)>_beginti
me
hh:mm 4/4 Begin time of schedule mode.
profile_i<0~(m-1)>_endtim
e
hh:mm 4/4 End time of schedule mode.
profile_i<0~(m-1)>_win_i<
0~2>_enable
<boolean> 4/4 Enable motion window.
profile_i<0~(m-1)>_win_i<
0~2>_name
string[14] 4/4 Name of motion window.
profile_i<0~(m-1)>_win_i<
0~2>_left
0 ~ 320 4/4 Left coordinate of window position.
profile_i<0~(m-1)>_win_i<
0~2>_top
0 ~ 240 4/4 Top coordinate of window position.
profile_i<0~(m-1)>_win_i<
0~2>_width
0 ~ 320 4/4 Width of motion detection window.
profile_i<0~(m-1)>_win_i<
0~2>_height
0 ~ 240 4/4 Height of motion detection window.
profile_i<0~(m-1)>_win_i<
0~2>_objsize
0 ~ 100 4/4 Percent of motion detection window.
profile_i<0~(m-1)>_win_i<
0~2>_sensitivity
<product dependent>
0 ~ 100 4/4 Sensitivity of motion detection window.
7.15 Tampering detection settings
Group: tampering_c<0~(n-1)> for n channel product (product dependent)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 4/4 Enable or disable tamper detection.
threshold 0 ~ 255 4/4 Threshold of tamper detection.
duration 10 ~ 600 4/4 If tampering value exceeds the ‘threshold’ for
more than ‘duration’ second(s), then tamper
detection is triggered.