Need help?Do you have a question about the Vivotek IP8332 and is the answer not in the manual?
General| Minimum illumination | 0.3 lx |
|---|---|
| Field of view (FOV) angle | 56 ° |
| Maximum resolution | 1280 x 800 pixels |
| Video compression formats | H.264 |
| Power over Ethernet (PoE) | Yes |
| Wi-Fi | No |
| International Protection (IP) code | IP66 |
Important warnings and instructions before installing and using the network camera.
Step-by-step guide for physically installing the network camera hardware.
Guides on setting up the camera for internet connection and via router.
Details the installation and use of the Installation Wizard 2 (IW2) software.
Steps to access the camera on LAN and retrieve live video.
Guide to accessing the camera's interface using web browsers and handling ActiveX controls.
How to view streams using RTSP players and the required URL command.
Explains the live video window interface, control buttons, and recording features.
Details the four transmission modes for H.264/MPEG-4 streaming.
Explains the two user interface modes for camera setup.
Enabling password protection and managing user accounts with privileges.
Enabling secure HTTPS communication and installing SSL certificates.
Configuring connection type (LAN, PPPoE) and static IP addresses.
Enabling UPnP for network discovery and configuring PPPoE for internet access.
Setting HTTP authentication modes and port numbers.
Configuring dynamic DNS service for a fixed host name.
Configuring video quality, frame size, frame rate, and codec settings.
Steps to enable motion detection and define sensitivity and percentage.
Procedures for rebooting the camera and restoring default settings.
Steps for downloading and upgrading the network camera's firmware.
Detailed technical specifications for the IP8330 network camera.
Detailed technical specifications for the IP8332 network camera.
To Next Page
