VIVOTEK
User's Manual - 93
If successful, you will receive a test.txt le on the network storage server.
3. Enter a server name.
4. Click Save to complete the settings and click Close to exit the page.
Recording Settings
Click Add to open the recording setting page. In this page, you can define the recording source,
recording schedule, and recording capacity. A total of 2 recording settings can be congured.
Recording name: Enter a name for the recording setting.
Enable this recording: Select this option to enable video recording.
With adaptive recording: You can specify the length of video recording to be taken before and after an
event. When enabled, the network camera will record only the I frame during normal situation, and raise
To Next Page
Loading...
