EN - 6
1
2
3
AP
Wireless Connection #2: Connection without WPS
2. Right-click or double-click on the VIVOTEK (MAC addr) icon. The camera name is
presented as: "VIVOTEK: (the last 4 digits of the camera's MAC address)."
Open a browser session using the camera's default IP "192.168.1.1"
If not using the WPS method, you can manually configure the camera:
1. Connect power to the camera. By default, the camera operates in the AP mode. Connect
to the camera using a Wi-Fi capable notebook or a computer with a wireless adaptor.
Open the internet dialog box by clicking the wireless networks icon on the system tray.
VIVOTEK (1C:CC)
AP mode
Client
mode
To Next Page
Loading...
