Vivotek IP8371E - Page 147

VIVOTEK
User's Manual - 147
s2: cbr
s3: cbr
smart , smart stream
s<0~(m-1)>_h264_quant 1~5,
99, 100
3 1/4 Quality of video when choosing
vbr in “ratecontrolmode”.
99 is the customized manual
input setting.
1 = worst quality, 5 = best
quality.
100 is percentage mode.
s<0~(m-1)>_h264_qvalue 0~51 30 1/4 Manual video quality level input.
(s<0~(m-1)>_h264_quant =
99)
s<0~(m-1)>_h264_qpercen
t
1~100 45 1/4 Manual video quality level input.
(s<0~(m-1)>_h264_quant =
100)
s<0~(m-1)>_h264_bitrate 1000~320000
00
8000000 4/4 Set bit rate in bps when
choosing cbr in
“ratecontrolmode”.
s<0~(m-1)>_h264_maxvbr
bitrate
1000~400000
00
40000000 1/4 Set bit rate in bps when
choosing vbr in
“ratecontrolmode”.
s<0~(m-1)>_h264_maxfra
me
1~50,
51~60 (only
for NTSC or
60Hz CMOS)
10 1/4 Set maximum frame rate in fps
(for h264).
3M : 1~30fps
2M : 1~60fps
(for NTSC or 60Hz CMOS)
s<0~(m-1)>_h264_profile
<product dependent>
0~2 1 1/4 Indicate H264 profiles
0: baseline
1: main profile
2: high profile
s<0~(m-1)>_h264_priorityp
olicy
framerate,imag
equality
framerate 1/4 Set prioritypolicy
s<0~(m-2)>_h264_smartstr
eam_mode
0~2 0 1/4 Set Smart stream mode
0:Auto (Motion detection for
ROI)
1:Manual (set manual window
for ROI)
2:Auto and Manual (mix both
motion detection and Manual
window for ROI)