Vivotek IP8371E - Page 152

VIVOTEK
152 - User's Manual
daymodeendtime 00:00~23:59 18:00 6/6 Day mod end time
bwmode <boolean> 1 1/6 Switch to B/W in night mode if
enabled
sensitivity low,
normal,
high
normal 1/6 Sensitivity of light sensor
7.11 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightnesspercent 0~100 0 4/4 Adjust brightnesspercent of image
saturationpercent 0~100 50 4/4 Adjust saturation value of percentage
when saturation=100
contrastpercent 0~100 50 4/4 Adjust contrastpercent of image
sharpnesspercent 0~100 50 4/4 Adjust sharpness value of percentage
when sharpness=100
dnr_mode 0~1 0 4/4 0:disable
1:enable
dnr_strength 0~100 50 4/4 Strength of DNR
profile_i0_enable <boolean> 0 4/4 Enable/disable this profile setting
profile_i0_policy day,
night,
schedule
night 4/4 The mode which the profile is applied to.
profile_i0_begintime hh:mm 18:00 4/4 Begin time of schedule mode.
profile_i0_endtime hh:mm 06:00 4/4 End time of schedule mode.
profile_i0_brightnesspercent 0~100 0 4/4 Adjust brightnesspercent of image
profile_i0_contrastpercent 0~100 50 4/4 Adjust contrastpercent of image
profile_i0_saturationpercent 0~100 50 4/4 Adjust saturationpercent of image
profile_i0_sharpnesspercent 0~100 50 4/4 Adjust sharpnesspercent value of image
profile_i0_dnr_mode 0~1 0 4/4 0:disable
1:enable
profile_i0_dnr_strength 0~2 1 4/4 Strength of DNR
profile_i0_wdrcstrength 0~2 1 4/4 WDR enhanced
0: low
1: medium
2: high