Vivotek IP8371E - Page 154

VIVOTEK
154 - User's Manual
7.12 Image setting for preview
Group: imagepreview_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightness -5~5 -5 4/4 Adjust brightness of image according to mode
settings.
saturation -5~5,100 0 4/4 Adjust saturation of image according to mode
settings.
100 for saturation percentage mode.
saturationpercent 0~100 50 4/4 Adjust saturation value of percentage when
saturation=100
contrast -5 ~ 5 0 4/4 Adjust contrast of image according to mode
settings.
sharpness -3~3,100 0 4/4 Adjust sharpness of image according to mode
settings.
sharpnesspercent 0~100 50 4/4 Adjust sharpness value of percentage when
sharpness=100
dnr_mode 0~1 0 4/4 0:disable
1:enable
dnr_strength 0~2 1 4/4 Strength of DNR
Group: imagepreview
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
videoin_whitebalance auto,
manual,
rbgain
auto 1/4 Preview of adjusting white balance of image
according to mode settings
videoin_restoreatwb 1~ 0 4/4 Restore of adjusting white balance of image
according to mode settings
videoin_rgain 0~100 0 1/4 Manual set rgain value of gain control setting.
videoin_bgain 0~100 0 1/4 Manual set bgain value of gain control setting.