Vivotek MD8563-HF2 - Page 231

VIVOTEK
User's Manual - 231
ircutsensitivity_type <string> 0/7 Indicate the cgi interface of
"ircutcontrol_sensitivity".
"options": the value of
"ircutcontrol_sensitivity" parameter is "low,
normal,high".
"normalize": the value of
"ircutcontrol_sensitivity" parameter is "1~100"
* Only available when
"capability_daynight_c<n>_support" is 1.
* We support this parameter when the version
number (httpversion) is equal or greater than
0302a.
ircutsensitivity_supportlevel 0,
<positive integer>
0/7 The value indicate the support strength level of
ircutsensitivity.
* Only available when
"capability_daynight_c<n>_support" is 1 and
"capability_daynight_c<n>
_ircutsensitivity_type" is normalize.
* We support this parameter when the version
number (httpversion) is equal or greater than
0302a.
Group: capability_videoin_c<0~(n-1)> n denotes the value of "capability_nvideoin"
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
lens_type fisheye, fixed,
varifocal, changeable,
motor, -
<product dependent>
0/7
Thelenstypeofthischannel.
fisheye:Fisheyelens
fixed:Build‐infixed‐focuslens.
varifocal:Build‐invarifocallens.
changeable:changeablelens.Likebox‐type
camera,userscaninstallanyC‐Mountor
CS‐Mountlensastheywish.
motor:Lenswithmotortosupportzoom,focus,
etc.
‐:N/A

* Only available when [httpversion] >= 0301a
rotation <boolean> 0/7 Indicate current mode whether support video
rotation