VIVOTEK
58 - User's Manual
Exclude x
Tips:
If there is an object in close proximity, the IR lights
reflected back from it can mislead the Smart IR’s
calculation of light level. To solve this problem, you
can place an “Exposure Exclude” window on an
unavoidable object in the Exposure setting window.
See page 62 for how to do it.
You can also configure the “Exposure Exclude”
window in a night mode “Prole” setting so that your
day time setting is not affected.
Exclude x
Manual IR adjust
This function only takes effect when the “Turn on built-in IR illuminator in night mode” is enabled.
By default, the “Auto” mode is enabled.
One time adjust: firmware algorithm will automatically adjust the IR light intensity on 4 different
sensors’ overage areas. The percentage of the 4 coverage areas will display on screen.
You can individually adjust the IR light intensity on the 4 areas using the slide bars.
To Next Page