Vivotek VS8100 - Page 126

VIVOTEK
126 - User's Manual
s<0~(m-1)>_h264_quant 1~5,99,100 3 4/4 Quality of video when
choosing vbr in
“ratecontrolmode”.
Set the pre-defined quality
level:
1: Median
2: Standard
3: Good
4: Detailed
5: Excellent
100: Use the quality level in
"qpercent"
99: Use the quality level in
"qvalue"
s<0~(m-1)>_h264_qpercent 1~100 50 4/4 Set quality by percentage.
1: Worst quality
100: Best quality
(s<0~(m-1)>_h264_quant =
100)
s<0~(m-1)>_h264_qvalue 0~51 29 4/4 Manual video quality level
input.
(s<0~(m-1)>_h264_quant =
99)
s<0~(m-1)>_h264_bitrate 1000~4000000
0
3000000 4/4 Set bit rate in bps when
choosing cbr in
“ratecontrolmode”.
s<0~(m-1)>_h264_maxframe 1~25,
26~30 (only for
NTSC or 60Hz
CMOS)
25 => PAL
CCD or
50Hz
CMOS
30 =>
NTSC
CCD or
60Hz
CMOS
1/4 Set maximum frame rate in
fps (for h264).
s<0~(m-1)>_h264_profile 0~2 1 1/4 Indicate H264 profiles
0: baseline
1: main profile
2: high profile
s<0~(m-1)>_mjpeg_priorit framerate, framerate 4/4 The policy to apply when