• For the basic setting, close the compensator or needle valve completely (not too tight, slight
resistance can be felt) and open it again as follows:
• Compensator lower cone (sparkling water) for TG devices: 1.5 turns.
• Compensator lower cone (sparkling water) for Hygiene Plus devices: 2-2.25 turns.
• Upper cone compensator (still water): 1.0 turns
• Needle valve DMT Top Pro: 1.25 - 1.5 turns
• Needle valves from the manufacturer Römer (Fig. 1, included in production at the end of 2020) are
completely opened for the basic setting and then 4.5 turns closed for Top Pro. To ne-tune the
medium spray pattern, the Römer needle valve must then be opened slightly wider.
Step 2 — Basic settings
To Next Page
Loading...
