1. Place the hearing instrument over the top of your ear.
2. Hold the tube close to the dome with the thumb and forefinger. Insert the
dome with gentle pressure into your ear canal until the tube sits flush against
the side of the face. The dome should fit in the ear canal snug, but not tight.
3. Using the index finger, tuck the retention lock into the edge of the bowl of the
ear just above the area of the ear lobe.
1 2 3
On and off function
Volume control
7 8
How to wear the instrument
NOTE: Turn on the hearing instrument before inserting dome into the ear canal.
Keep volume at low or comfortable setting; but not loud, to avoid feedback effect.
Turn on
Gently insert battery and close the door. The hearing instrument has built-in
power on delay, so it will takes several seconds for the device to activate its full
functions.
Turn off
Simply keep battery door open.
This also helps extend battery life.
Both volume and selection program can be adjusted by memory
switch, as well as by Bluetooth.For learn how to connect and use
Bluetooth mode, please refer to the app user manual.
To Next Page
Loading...