Vizio D320-B1 User Manual

4
18
Completing the First-Time Setup
The first time you turn on the TV, the Setup App will guide you
through each of the steps necessary to get your TV ready for use.
Before you begin the first-time setup:
• Your TV should be installed and the power cord should
be connected to an electrical outlet.
• Your devices should be connected.
• If you have a wireless network, have the wireless
password ready.
• If you are connecting to your network with an Ethernet
cable, connect it to the Ethernet port on the TV.
To complete the first-time setup:
1. Press the Power/Standby
button on the remote. The TV
powers on and the Setup App
starts.
2. Use the Arrow buttons on the
remote to highlight Home Use
and press OK.
3. Use the Arrow buttons on
the remote to highlight your
preferred language, and then
press the OK button.
4. Use the Arrow buttons on
the remote to highlight your
country, and then press the OK
button.
5. Use the Arrow and OK buttons
on the remote to answer the
question about your TV signal
connection, then perform the
channel scan or select the
input source for your cable or
satellite box.
6. When you are finished, “Your
VIZIO TV is set up” will be
displayed.
The First-Time Setup is complete.
Choose your mode.
Select Store Demo for in-store display.
Select Home Use for in-home use.
Seleccione "Home Use" por Modo de Casa o "Store Demo" por Demostración de Tienda.
Choisissez "Home Use" pour Mode Domicile ou "Store Demo" pour Démonstration de Magasin.
Store Demo Home Use

Vizio D320-B1 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	32 \
Display brightness	- cd/m²
Display resolution	1366 x 768 pixels
Native aspect ratio	16:9
Native refresh rate	60 Hz
LED backlighting type	Full-Array
Contrast ratio (dynamic)	200000:1
Motion interpolation technology	-
3D	No
Annual energy consumption	61 kWh
Power consumption (average)	32 W
Audio decoders	DTS TruVolume, DTS Studio Sound
RMS rated power	10 W
Number of speakers	2
DVI-D ports quantity	0
USB 2.0 ports quantity	1
Remote control type	XRT020
Product color	Black
Panel mounting interface	100 x 100 mm
Number of OSD languages	3
On Screen Display (OSD) languages	ENG, ESP, FRE
Package depth	141 mm
Package width	795 mm
Package height	515.8 mm
Package weight	7901.5 g
Sustainability certificates	ENERGY STAR
Power consumption (standby)	1 W

Weight and Dimensions

Depth (with stand)	174.5 mm
Width (with stand)	733.5 mm
Height (with stand)	486.6 mm
Weight (with stand)	5801.4 g
Depth (without stand)	66.5 mm
Height (without stand)	444.5 mm
Weight (without stand)	5502 g