Vizio D320-B1 User Manual

5
39
Adjusting the CEC Settings
The CEC function on your TV enables you to control
HDMI-connected devices with the included remote without any
additional programming.
Not all HDMI devices support CEC. See your device’s
user manual for details.
To enable, disable, or adjust CEC settings:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System
and press OK. The SYSTEM menu is displayed.
3. Use the Arrow buttons on the remote to highlight CEC and
press OK. The CEC menu is displayed.
4. Use the Arrow and OK buttons to adjust each setting:
• CEC - To use CEC, you must select On.
• System Audio Control - When system audio control is on,
you can control your device’s audio using the TV’s remote
control.
• Device Discovery - Use this function to determine if your
device is connected and supports CEC.
5. Press the EXIT button on the remote.
Turning the Power Indicator On or Off
The Power Indicator on the front of your TV normally does not
glow when the TV is on. You can change this setting if you prefer
the light to be on.
To turn the Power Indicator Light on or off:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System
and press OK. The SYSTEM menu is displayed.
3. Highlight Power Indicator and press OK. The POWER
INDICATOR menu is displayed.
4. Use the Up/Down Arrow buttons to select On or Off, then
press OK.

Vizio D320-B1 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	32 \
Display brightness	- cd/m²
Display resolution	1366 x 768 pixels
Native aspect ratio	16:9
Native refresh rate	60 Hz
LED backlighting type	Full-Array
Contrast ratio (dynamic)	200000:1
Motion interpolation technology	-
3D	No
Annual energy consumption	61 kWh
Power consumption (average)	32 W
Audio decoders	DTS TruVolume, DTS Studio Sound
RMS rated power	10 W
Number of speakers	2
DVI-D ports quantity	0
USB 2.0 ports quantity	1
Remote control type	XRT020
Product color	Black
Panel mounting interface	100 x 100 mm
Number of OSD languages	3
On Screen Display (OSD) languages	ENG, ESP, FRE
Package depth	141 mm
Package width	795 mm
Package height	515.8 mm
Package weight	7901.5 g
Sustainability certificates	ENERGY STAR
Power consumption (standby)	1 W

Weight and Dimensions

Depth (with stand)	174.5 mm
Width (with stand)	733.5 mm
Height (with stand)	486.6 mm
Weight (with stand)	5801.4 g
Depth (without stand)	66.5 mm
Height (without stand)	444.5 mm
Weight (without stand)	5502 g