Vizio D320-B1 User Manual

A
45
The TV displays “No Signal.”
• Press the INPUT button on the remote control to select a
different input source.
• If you are using cable TV, satellite, or an antenna
connected directly to the TV, scan for channels. See
Scanning for Channels on page 28.
There is no power.
• Ensure the TV is plugged into a working electrical outlet.
• Ensure the power cable is securely attached to the TV.
• Press the Power/Standby button on the remote or on
the side of the TV to turn the TV on.
The power is on, but there is no image on the screen.
• Ensure all cables are securely attached to the TV.
• Ensure all devices are connected correctly. Devices
differ; see your device’s user manual for details.
• Adjust Brightness, Contrast, or Backlight. See
Adjusting
the Picture Settings on page 21.
• Press the INPUT button on the remote to select a
different input source.
There is no sound.
• Press Volume Up on the remote control.
• Press the MUTE button on the remote to ensure mute is
off.
• Check the audio settings. See
Adjusting the Audio
Settings on page 25. Ensure that the speakers are set
to On.
• Ensure no headphones are connected to the TV.
• Check the audio connections of external devices
(Blu-ray player, game console, cable/satellite box) that
are connected to the TV.
• If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
The colors on the TV don’t look right.
• Adjust the Color and Tint settings in the Picture menu.
See
Adjusting the Picture Settings on page 21.
• Check all cables to ensure they are securely attached.
• Reset the picture settings. See
Resetting the Picture
Settings on page 24.
The buttons on the remote aren’t working.
• Ensure you are only pressing one button at a time.
• Point the remote directly at the TV when pressing a
button.
• Replace the remote batteries with new ones. See
Replacing the Batteries on page 11.

Vizio D320-B1 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	32 \
Display brightness	- cd/m²
Display resolution	1366 x 768 pixels
Native aspect ratio	16:9
Native refresh rate	60 Hz
LED backlighting type	Full-Array
Contrast ratio (dynamic)	200000:1
Motion interpolation technology	-
3D	No
Annual energy consumption	61 kWh
Power consumption (average)	32 W
Audio decoders	DTS TruVolume, DTS Studio Sound
RMS rated power	10 W
Number of speakers	2
DVI-D ports quantity	0
USB 2.0 ports quantity	1
Remote control type	XRT020
Product color	Black
Panel mounting interface	100 x 100 mm
Number of OSD languages	3
On Screen Display (OSD) languages	ENG, ESP, FRE
Package depth	141 mm
Package width	795 mm
Package height	515.8 mm
Package weight	7901.5 g
Sustainability certificates	ENERGY STAR
Power consumption (standby)	1 W

Weight and Dimensions

Depth (with stand)	174.5 mm
Width (with stand)	733.5 mm
Height (with stand)	486.6 mm
Weight (with stand)	5801.4 g
Depth (without stand)	66.5 mm
Height (without stand)	444.5 mm
Weight (without stand)	5502 g