Vizio D32hn-E4 User Manual

3
rnin te oer nicator n or 
The Power Indicator on the front of your TV normally does not glow
when the TV is on. You can change this setting if you prefer the light
to be on.
To turn the Power Indicator Light On or O:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
3. Highlight Power Indicator and press OK.
4. Use the Up/Down Arrow buttons to select On or , then
press OK.
Accessibility
VIZIO is committed to providing intuitive, user-friendly products.
Your new VIZIO TV oers several accessibility features that can help
you get the most out of it..
To access the Accessibility menu:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
3. Use the Arrow buttons on the remote to highlight
Accessibility and press OK. The ACCESSIBILITY menu is
displayed.
• Talk Back - Turn Text-to-Speech Talk Back On or .
Text-to-Speech Talk Back enables your TV to speak all
settings changes and adjustments using the remote in
English.
• Speech Rate* - Adjusts the rate in which Text-to-Speech is
spoken. Select Slow, Normal (Default), or Fast.
• Zoom Mode - Enlarges a section of the screen by 200%.
4. Press the EXIT button on the remote when done.
Adjusting the CEC Settings
The CEC function on your TV enables you to control devices
connected to HDMI (ARC) input with the included remote, without
any programming. Using CEC, your VIZIO TV remote can control:
• Power On/O
• Volume
• Mute
Not all HDMI devices support CEC. See your device’s
user manual for details.
To enable, disable, or adjust CEC settings:
1. Set up your audio device and connect it to the HDMI-1(HDMI
Arc) input on the TV
2. On your audio device, select the HDMI ARC input
3. Press the MENU button on the remote. The on-screen menu is
displayed.
4. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
5. Use the Arrow buttons on the remote to highlight CEC and
press OK. The CEC menu is displayed.
6. Highligh CEC and press OK. Select a setting and then press OK.
• CEC - To use CEC, you must select Enable.
• Device Discovery - To determain if your device is
connected and supports CEC, select Device Discovery and
then press OK.
7. Press the EXIT button on the remote.
33

Vizio D32hn-E4 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	32 \
Display brightness	- cd/m²
Display resolution	- pixels
Display technology	LED
Native aspect ratio	16:9
LED backlighting type	Full-Array
Supported video modes	720p
Contrast ratio (dynamic)	200000:1
Display number of colors	16.78 million colors
Display refresh rates supported	60 Hz
Number of OSD languages	3
On Screen Display (OSD)	Yes
On Screen Display (OSD) languages	ENG, ESP, FRE
Audio decoders	DTS TruSurround
RMS rated power	16 W
Number of speakers	2
3D	-
Battery type	AAA
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	1
Remote control type	XRT020
Power consumption (standby)	0.5 W
Power consumption (typical)	24 W
Product color	Black
Panel mounting interface	100 x 100 mm
Package depth	136.9 mm
Package width	788.9 mm
Package height	508 mm
Package weight	6391.1 g
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth (with stand)	199.8 mm
Width (with stand)	729.7 mm
Height (with stand)	484.1 mm
Weight (with stand)	4699.2 g
Depth (without stand)	73.9 mm
Height (without stand)	434.3 mm
Weight (without stand)	4499.6 g